Română (România)Hungarian (formal)English (United Kingdom)

 

Adeziv polistiren

There are no translations available. Adeziv pentru placari de polistiren pe suport beton, tencuiala de ciment, caramida, BCA sau BCU cu diferente de nivel de pana la 5 avand o aderenta excelenta inca de la inceputul aplicarii placilor pe suport

 

Adeziv gresie si faianta ext-interior

There are no translations available. Adeziv gresie si faianta exterior si interior ce lipeste piese ceramice, piatra, marmura, polistiren cu o aderenta excelenta inca de la inceputul aplicarii placilor pe suport.

Adhesive for polistyrene

Product Specification:

- adhesive for the polystyrene on concrete support, bricks, autoclaved cellular concrete(ACC), light cellular concrete(LCC) with level difference of ~ 5 mm;

 

Product composition:

- cement-based product of great strength, super additivated, plasticizers, siliceous sand;

 

Product characteristics and ways of application:

- after the preparation, is obtained a creamy texture paste;

- both outdoor and indoor application;

- excellent adherence strenght from the begining of support plate application;

- supports should be resistant, stable, clean, free of dust, free of organic products or scraps from striking;

- layers having weak adherence and mechanical resistance will be removed and repaired;

 

The way of preparation:

- the product will be strewed in clean water in order to be mixed manually or by mechanically means until is obtained a homogenous material paste;

- leave paste still approximately for 5 minutes and then mix up again;

- the paste will be ready to use where it has a creamy texture;

 

The application of polystyrene plates:

- to be fixed at the base level a socle profile or a grid ruler with the width adapted acordingly to the system thickness;

- the adhesive paste needs to be applied by means of a toothed spatula on the surface of the polystyrene plate;

- after gluing of several polystyrene plates, the outline will be righten a leveling board, the corners shall be reinforced with fiber glass and adhesive before the general reinforcing is cast;

- depending on the finishing loading or in case of the old plaster, the polystyrene plates shall be reinforced with pegs with different sizes depending on the plate's thickness, the plaster’s and the applying support;

 

The casting of the fiber glass:

- level the adhesive using a cogged trowel in order to form a 3 mm layer on a minimum 1.2 mp surface;

- the plastic mesh application must be done immediately before the adhesive paste hardens by leveling and pressing in the adhesive using a finishing leveling board;

- for the final finishing - leave a minimum interval of 7 days at a 20˚C temperature;

 

Technical data:

 

- temperature:  5-30°C

- admixture ratio:  25kg product/aprox 7-8l water

- approximately discharged material weight/mp:plates:  3-4kg/mp

                                                                       mesh:  2.5-3kg/mp

- application time:  30 min from preparation

- mesh application time delay:  min. 24 hours

 

 

News


Newsletter

Please subscribe to our newsletter in order to keep up to date with latest news.

Name:
E-mail:

Visitors

We have 274 guests online